Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 4 tutoriels qui comprennent cette étape.

Anglais
Chinois

Traduction de l’étape 10

Étape 10
Find a connector on the motherboard labeled HD TMP or HDD TEMP. If you have trouble locating it, trace the two-wire temperature cable you disconnected from the old hard drive. If the previous temperature cable is still connected to the board here, disconnect and remove it.  You will no longer need it.
  • Find a connector on the motherboard labeled HD TMP or HDD TEMP.

  • If you have trouble locating it, trace the two-wire temperature cable you disconnected from the old hard drive.

  • If the previous temperature cable is still connected to the board here, disconnect and remove it. You will no longer need it.

  • Connect the temperature sensor's two-wire red-black cable to the motherboard plug labeled HD TMP or HDD TEMP.

  • The connector is keyed to fit in one way only. If it seems like the connector is not fitting the socket, flip the connector and try again.

  • Route the excess wire so it does not interfere with any other components.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.