Aller au contenu principal
Anglais
Italien

Traduction de l’étape 1

Étape 1
Remove the two 12 mm shouldered T8 Torx screws holding the hard drive bracket to the connector side of the hard drive. After removing these two screws, the bracket will fall away from the hard drive.
  • Remove the two 12 mm shouldered T8 Torx screws holding the hard drive bracket to the connector side of the hard drive.

  • After removing these two screws, the bracket will fall away from the hard drive.

Rimuovere le due viti Torx T8 da 12 mm con bordino che fissano la staffa del disco rigido a quest'ultimo dal lato del connettore.

Dopo aver rimosso le due viti, la staffa del disco rigido sarà libera da quest'ultimo.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.