Aller au contenu principal
Anglais
Espagnol

Traduction de l’étape 3

Étape 3
Use the flat end of a spudger to pry the thermal sensor board off the adhesive securing it to the hard drive.
  • Use the flat end of a spudger to pry the thermal sensor board off the adhesive securing it to the hard drive.

  • If you're replacing your hard drive, transfer this sensor to the same position on the new drive.

  • Users have reported that without the sensor connected, the fans will run consistently at maximum speed.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.