Aller au contenu principal
Anglais
Français

Traduction de l’étape 2

Étape 2
Bend the wire around the contact point. Pin numbers are located on the outside of the connector.
  • Bend the wire around the contact point. Pin numbers are located on the outside of the connector.

  • Connect the red wire to Pin 3 and the blue wire to Pin 2.

  • Pin 1 should have a single piece of exposed wire connecting it to the metal plate on the top of the connector (the ground plate).

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.