Réparez vos affaires Communauté Boutique

Pelado de cables

Retourner au tutoriel
Anglais
Espagnol
Étape précédente Étape suivante

Traduction de l’étape 2

Étape 2
Wire Stripping: étape 0, image 1 de 1

  • Place the wire stripper about a 1/4” from the end of the wire and squeeze down.

  • You can strip more than 1/4" at a time, but the effort becomes harder. About 1/2-5/8" (13-16 mm) is the most you should probably attempt.

Coloca el pelacables a aproximadamente 1/4" del extremo del cable y aprieta hacia abajo.

Puedes pelar más de 1/4» de una vez, pero el esfuerzo se hace más duro. Aproximadamente 13-16 mm (1/2-5/8") es lo máximo que probablemente deberías intentar.

[* black] Place the wire stripper about a 1/4” from the end of the wire and squeeze down.
-[* icon_note] You can strip more than 1/4" at a time, but the effort becomes harder. About 1/2-5/8" (13-16 mm) is the most you should probably attempt
+[* icon_note] You can strip more than 1/4" at a time, but the effort becomes harder. About 1/2-5/8" (13-16 mm) is the most you should probably attempt.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.