Aller au contenu principal

Austausch der Tastatur/des Lüfters beim Lenovo Thinkpad x230 Laptop

Anglais
Allemand

Traduction de l’étape 3

Étape 3
Lenovo Thinkpad x230 laptop keyboard/fan Replacement, Installation Tips:: étape 0, image 1 de 1
Installation Tips:
  • 1.According to the dismantling method, reversely install each part.

  • 2.Sort out the cable to prevent the keyboard from popping up after the installation

  • 3.Gray and black lines are the two antennas of the wireless card and

  • 4.Fix the wrist bracket below first

  • 5.Fix the upper part of the keyboard and then pull down the keyboard

  • In addition to the screws on the hard disk cover, all black screws can be mixed After all parts are installed, try to start it

1. Montiere jedes Teil, der Demontagereihenfolge entsprechend, in umgekehrter Reihenfolge.

2. Ordne die Kabel, um zu verhindern, dass die Tastatur nach der Installation herausspringt.

3. Grau und schwarz sind die zwei Antennen der Wifi-Karten und des Bluetoothmoduls.

4. Baue zuerst die Handablage wieder ein.

5. Befestige den oberen Teil der Tastatur und drücke danach auf die Tastatur.

Ein Hinweis zu den Schrauben der Festplattenhalter, alle schwarzen Schrauben können vertauscht werden. Nachdem alle Teile wieder eingebaut sind, versuche das Laptop anzuschalten.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.