Blue Yeti Disassembly

Anglais

Français

Traduction de l’étape 6

Étape 6

Disconnecting the Mic Condensers

If you need to disconnect the microphone cap from the board, pay close attention to the connections.
There are 3 condenser, therefore 3 pairs of wires connect to the board, each with their own wire color (black & white, black & red and black & blue)
Pick a position from where to look at the board and take notes of the position of each connector. This is important, since it will directly affect the PATTERN MODES selected in the back side of the mic.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.