Aller au contenu principal
Anglais
Espagnol

Traduction de l’étape 8

Étape 8
Use the pointed end of a spudger to pry up one corner of the earpiece speaker. Continue lifting the speaker until it is completely separated from its adhesive. Remove the earpiece speaker.
  • Use the pointed end of a spudger to pry up one corner of the earpiece speaker.

  • Continue lifting the speaker until it is completely separated from its adhesive.

  • Remove the earpiece speaker.

  • During reassembly, make sure to install the speaker with its spring contacts on the left side, so that they match up with the contacts on the underside of the upper plastic cover.

Usa el extremo puntiagudo de un spudger para levantar una esquina del altavoz auricular.

Continúa levantando el altavoz hasta que esté completamente separado de su adhesivo.

Remueve el altavoz auricular.

Durante el reensamblaje, asegúrate de instalar el altavoz con sus contactos de resorte en el lado izquierdo, de modo que coincidan con los contactos de la parte inferior de la cubierta de plástico superior.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.