Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 2 tutoriels qui comprennent cette étape.

Anglais
Français

Traduction de l’étape 7

Étape 7
During reassembly, to seat the headphone jack connector, pull the entire game card reader board slightly toward the top edge of the Switch so that the headphone jack connector lines up with its socket. Use your spudger to press the connector down until it snaps into place. Press all along the top of the connector to make sure it seats correctly, including the area under the heat pipe.
Reassembly Note
  • During reassembly, to seat the headphone jack connector, pull the entire game card reader board slightly toward the top edge of the Switch so that the headphone jack connector lines up with its socket.

  • Use your spudger to press the connector down until it snaps into place.

  • Press all along the top of the connector to make sure it seats correctly, including the area under the heat pipe.

Utilisez l'extrémité pointue d'une spatule pour faire glisser la nappe hors du connecteur ZIF.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.