Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 7 tutoriels qui comprennent cette étape.

Anglais
Chinois

Traduction de l’étape 8

Étape 8
The top edge of the display is secured with both glue and clips. Slide the opening pick around the top corner of the display, while gently pulling or wiggling the display down in the direction of the Lightning port. The clips will break if you use too much force. Work carefully and be patient.
  • The top edge of the display is secured with both glue and clips.

  • Slide the opening pick around the top corner of the display, while gently pulling or wiggling the display down in the direction of the Lightning port.

  • The clips will break if you use too much force. Work carefully and be patient.

  • Again, don't insert the pick more than a few millimeters—about the width of the display bezel—or you may damage the front panel sensor array.

  • Slide the pick to the opposite corner and cut any remaining adhesive securing the display.

显示屏幕的上边缘用胶水和卡扣固定。

将拆机撬片滑动到显示屏的顶角处,同时沿着Lightning端口的方向轻轻拉动或摆动显示屏。

如果你用力太大,屏幕或拆机撬片会破裂。这样做要小心和有耐心。

同样,不要将拆机撬片插入超过显示屏幕外边框宽度的几毫米 - 否则可能会损坏前面板传感器阵列。

将拆机撬片滑到对角并切割固定显示屏幕的任何剩余粘合剂。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.