Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Anglais
Chinois

Traduction de l’étape 1

Étape 1
Begin by removing all the old adhesive, glass, and any other debris from all adhesion surfaces. You can pull the adhesive off with tweezers or your fingers, roll it up on the tip of a spudger with a roll-and-pull motion, or scrape it off with the flat end of a spudger. After removing most of the adhesive, scrape with the tip of a spudger to get small bits of adhesive out of tight spaces.
Surface Preparation
  • Begin by removing all the old adhesive, glass, and any other debris from all adhesion surfaces.

  • You can pull the adhesive off with tweezers or your fingers, roll it up on the tip of a spudger with a roll-and-pull motion, or scrape it off with the flat end of a spudger.

  • After removing most of the adhesive, scrape with the tip of a spudger to get small bits of adhesive out of tight spaces.

  • When working around a battery, be extremely careful not to accidentally puncture or bend the battery.

首先从所有表面上清除所有旧的粘合剂、玻璃和任何其他碎屑。

你可以用镊子或手指将粘合剂拉出,用推拉动作将其卷到撬棒的尖端,或者用撬棒的扁平末端将其刮掉。

去除大部分粘合剂后,用撬棒的尖端刮擦,从狭小的空间中刮出少量粘合剂。

在电池周围工作时,要特别小心,不要意外刺穿或弯曲电池。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.