Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Anglais
Italien

Traduction de l’étape 4

Étape 4
Carefully slide the edge of your opening pick underneath the flex cable below the microphone. Twist gently to separate the microphone, while being careful not to strain or damage the flex cable. If needed, use the point of the spudger to finish separating the microphone from its notch in the front panel.
  • Carefully slide the edge of your opening pick underneath the flex cable below the microphone.

  • Twist gently to separate the microphone, while being careful not to strain or damage the flex cable.

  • If needed, use the point of the spudger to finish separating the microphone from its notch in the front panel.

Infila con cautela il bordo del tuo plettro di apertura sotto il microfono, passando sotto al cavo flex.

Torci delicatamente il plettro per staccare il microfono, stando attento a non forzare o danneggiare il cavo flex.

Se necessario, usa la punta dello spudger per portare a termine la separazione del microfono dal suo vano nel pannello anteriore.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.