Aller au contenu principal
Anglais
Français

Traduction de l’étape 2

Étape 2
Unscrew all eight 14mm screws closest to the edges of the speaker by spinning a size PH2 screwdriver in a counterclockwise motion. Dislodge face by holding speaker face down. Gently shake or tap front against table to fully remove face. OR grab ahold of the silver tab to pull the speaker face out. This may require force.
  • Unscrew all eight 14mm screws closest to the edges of the speaker by spinning a size PH2 screwdriver in a counterclockwise motion.

  • Dislodge face by holding speaker face down. Gently shake or tap front against table to fully remove face.

  • OR grab ahold of the silver tab to pull the speaker face out. This may require force.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.