Aller au contenu principal
Anglais
Français

Traduction de l’étape 1

Étape 1
Using a Phillips #1 screwdriver, remove the four 4.0mm corner screws securing the hard drive assembly to the body. Disconnect the hard drive from the back panel by sliding it to the left until loosened.
  • Using a Phillips #1 screwdriver, remove the four 4.0mm corner screws securing the hard drive assembly to the body.

  • Disconnect the hard drive from the back panel by sliding it to the left until loosened.

  • Remove it completely by lifting the hard drive out of the back panel.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.