Aller au contenu principal
Anglais
Français

Traduction de l’étape 4

Étape 4
Unplug the fan from the circuit board by gently pulling on the wire connector at the base of the port. Do not tug on the wires.  Slowly increasing force as you pull is the best way to detach the wires.
  • Unplug the fan from the circuit board by gently pulling on the wire connector at the base of the port.

  • Do not tug on the wires. Slowly increasing force as you pull is the best way to detach the wires.

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.