Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 22 tutoriels qui comprennent cette étape.

Anglais
Italien

Traduction de l’étape 2

Étape 2
Use the flat end of a spudger to disconnect the USB-C port cable bracket by prying it straight up from the logic board. To reconnect this cable, first line up the metal bracket over the screw holes, then press down on the middle of the bracket. Make sure it's aligned correctly, or you may damage the connector.
  • Use the flat end of a spudger to disconnect the USB-C port cable bracket by prying it straight up from the logic board.

  • To reconnect this cable, first line up the metal bracket over the screw holes, then press down on the middle of the bracket. Make sure it's aligned correctly, or you may damage the connector.

Usa la parte piatta di uno spudger per scollegare la staffa del cavo della porta USB C sollevandola dalla scheda madre.

Per ricollegare questo cavo, prima allinea la staffa in metallo coi fori delle viti, quindi premila al centro. Assicurati sia allineata correttamente, o potresti danneggiare il connettore.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.