Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Anglais
Espagnol

Traduction de l’étape 1

Étape 1
Desolder and remove the radio antenna from the motherboard.
  • Desolder and remove the radio antenna from the motherboard.

  • The radio antenna is a thru-hole-mounted device. You must apply heat to each soldered pin individually and pull them out of the holes while the solder is molten.

  • The solder material, pins, and any surrounding material will get VERY hot while melting the connections. Do not touch any metal parts during the desoldering process and give the device time to cool off once you’re finished. It may also be good to take breaks so that the electronics aren’t kept hot for extended periods of time.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.