Aller au contenu principal
Anglais
Français

Traduction de l’étape 1

Étape 1
Use a T5 Torx driver to remove the four 2.8 mm screws securing the RAM shield.
  • Use a T5 Torx driver to remove the four 2.8 mm screws securing the RAM shield.

  • If your device manufacturer opts to use notched T5 screws on this component, then a TR5 Security Torx will become necessary instead of a regular T5.

Utilisez un tournevis Torx T5 pour retirer les quatre vis de 2,8 mm qui maintiennent la plaque de protection de la RAM.

[* red] Use a T5 Torx driver to remove the four 2.8 mm screws securing the RAM shield.
[* icon_note] If your device manufacturer opts to use notched T5 screws on this component, then a TR5 Security Torx will become necessary instead of a regular T5.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.