Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 2 tutoriels qui comprennent cette étape.

Anglais
Espagnol

Traduction de l’étape 7

Étape 7
Use tweezers to wiggle the ambient light sensor and lift it from its notch in the display. If the sensor does not wiggle free after a few seconds, apply more heat and try again.
Lift the ambient light sensor
  • Use tweezers to wiggle the ambient light sensor and lift it from its notch in the display.

  • If the sensor does not wiggle free after a few seconds, apply more heat and try again.

  • The sensor remains attached to the rest of the sensor assembly via a very thin flex cable. Be careful not to strain or damage the cable.

Usa pinzas para mover el sensor de luz ambiental y levántalo de su muesca en la pantalla.

Si el sensor no se suelta después de unos segundos, aplica más calor e intenta nuevamente.

El sensor permanece unido al resto del ensamblaje del sensor a través de un cable plano muy delgado. Ten cuidado de no forzar o dañar el cable.

[title] Lift the ambient light sensor
[* black] Use tweezers to wiggle the ambient light sensor and lift it from its notch in the display.
[* icon_note] If the sensor does not wiggle free after a few seconds, apply more heat and try again.
[* icon_caution] The sensor remains attached to the rest of the sensor assembly via a very thin flex cable. Be careful not to strain or damage the cable.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.