Aller au contenu principal
Anglais
Français

Traduction de l’étape 4

Étape 4
Support the unit in one hand to remove tension from the wiring harness. Pinch the multi-wire connector and pull away from the unit to disconnect. Note the location and orientation of your RCA cables to aid in re-installation.  It is usually most useful to take a picture of the cables in place before removal.
  • Support the unit in one hand to remove tension from the wiring harness.

  • Pinch the multi-wire connector and pull away from the unit to disconnect.

  • Note the location and orientation of your RCA cables to aid in re-installation. It is usually most useful to take a picture of the cables in place before removal.

  • Remove the 4 RCA cords by simply pulling them out of each jack.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.