Réparez vos affaires

Droit à la réparation

Boutique

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Retourner au tutoriel
Anglais
Français
Étape précédente Étape suivante

Traduction de l’étape 4

Étape 4
Repeat the above steps to remove the remaining three adhesive strips. Be sure to hold onto the battery as you remove the final strip, or it may fling out of the iPhone unexpectedly.

  • Repeat the above steps to remove the remaining three adhesive strips.

  • Be sure to hold onto the battery as you remove the final strip, or it may fling out of the iPhone unexpectedly.

  • If you removed all of the adhesive strips successfully, skip the next step.

  • If the adhesive breaks off underneath the battery and can't be retrieved, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery in the area of the broken adhesive strip(s).

  • Wait about one minute for the alcohol solution to weaken the adhesive. Use the flat end of a spudger to gently lift the battery.

  • Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.

  • Be careful not to damage the ribbon cables or the wireless charging coil directly underneath the battery.

  • For an alternative method to unstick the battery, continue with the next step below.

Répétez les étapes ci-dessus pour retirer les trois bandes adhésives restantes.

Veillez à poser votre main sur la batterie pendant que vous enlevez la dernière bande pour éviter qu'elle soit éjectée de façon inattendue de l'iPhone.

Si vous avez réussi à retirer toutes les bandes adhésives, sautez l'étape suivante.

Si jamais une des bandes adhésives s'est cassée sous la batterie et que vous n'avez pas pu la récupérer, référez-vous à l'étape ci-dessous.

[* black] Repeat the above steps to remove the remaining three adhesive strips.
[* icon_caution] Be sure to hold onto the battery as you remove the final strip, or it may fling out of the iPhone unexpectedly.
[* black] If you removed all of the adhesive strips successfully, skip the next step.
[* icon_caution] If any oficon_note] If the adhesive strips brokebreaks off underneath the battery and could notcan't be retrieved, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery in the area of the broken adhesive strip(s).
[* black] Wait about one minute for the alcohol solution to weaken the adhesive. Use the flat end of a spudger to gently lift the battery.
[* icon_caution] Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.
[* icon_caution] Be careful not to damage the ribbon cables or the wireless charging coil directly underneath the battery.
[* icon_note] For an alternative method to unstick the battery, '''continue with the next step below'''.
[* icon_caution] If any oficon_note] If the adhesive strips brokebreaks off underneath the battery and could notcan't be retrieved, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery in the area of the broken adhesive strip(s).
[* black] Wait about one minute for the alcohol solution to weaken the adhesive. Use the flat end of a spudger to gently lift the battery.
[* icon_caution] Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.
[* icon_caution] Be careful not to damage the ribbon cables or the wireless charging coil directly underneath the battery.
[* icon_note] For an alternative method to unstick the battery, '''continue with the next step below'''.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.