Aller au contenu principal

Samsung Galaxy S9+ Glasrückseite austauschen

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 7 tutoriels qui comprennent cette étape.

Anglais
Allemand

Traduction de l’étape 3

Étape 3
Samsung Galaxy S9 Plus Rear Glass Removal: étape 0, image 1 de 2 Samsung Galaxy S9 Plus Rear Glass Removal: étape 0, image 2 de 2
  • If the phone's rear glass is cracked, the suction cup may not stick. Try lifting it with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed.

  • Press a suction cup onto the back cover.

  • Lift the back cover's bottom edge with your suction cup, opening a slight gap between the back cover and the frame.

  • This may require a significant amount of force, but you only need to open a very slight gap with the suction cup to insert your tool. If you have trouble, apply more heat to further soften the adhesive, and try again. The adhesive cools very fast, so you may need to heat it repeatedly.

  • Insert an opening pick in the gap and slide it to the bottom right corner.

Wenn die Glasrückseite zerbrochen ist, hält der Saugheber möglicherweise nicht gut. Versuche sie mit starkem Klebeband anzuheben, oder klebe den Saugheber mit Sekundenkleber fest und lasse ihn gut trocknen, bevor du weiterarbeitest.

Drücke einen Saugheber auf der Glasrückseite fest.

Hebe die Glasrückseite mit dem Saugheber unten leicht an, um einen kleinen Spalt zwischen Glasrückseite und Rahmen zu erzeugen.

Du brauchst dazu schon ziemlich viel Kraft, aber es genügt schon ein kleiner Spalt, damit du ein Werkzeug einsetzen kannst. Wenn es schwer geht, dann erwärme den Kleber erneut, so dass er weich wird. Versuche es dann erneut. Der Kleber kühlt schnell ab, du musst ihn eventuell mehrmals wieder erwärmen.

Setze ein Plektrum in den eben erzeugten Spalt ein und schiebe es in die untere rechte Ecke.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.