Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 7 tutoriels qui comprennent cette étape.

Anglais
Chinois

Traduction de l’étape 2

Étape 2
In the following steps, you'll be cutting through the adhesive securing the back cover.
  • In the following steps, you'll be cutting through the adhesive securing the back cover.

  • The adhesive in the inside of the back cover is laid out as seen in the image.

  • You'll be slicing through the adhesive in the areas shown:

  • Thick portions of adhesive

  • Thin areas of adhesive

  • Avoid prying or slicing in this area, to protect the fingerprint sensor flex cable.

在以下步骤中,你将切割固定后盖的粘合剂。

如图所示,后盖内侧的粘合剂是这样布置的。

你将在所示区域中切割粘合剂:

粘合剂厚的区域

粘合剂薄的区域

避免在此区域撬或切片,以保护指纹传感器柔性电缆。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.