Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 3 tutoriels qui comprennent cette étape.

Anglais
Espagnol

Traduction de l’étape 2

Étape 2
The bracket is lightly adhered in place. Gently lift to unstick and remove the bracket, being careful not to bend it. If necessary, apply a little heat with a hair dryer or heat gun to soften the adhesive. (Putting an iOpener on the bracket is not recommended, as this may bend the spring contacts along the top.)
  • The bracket is lightly adhered in place.

  • Gently lift to unstick and remove the bracket, being careful not to bend it.

  • If necessary, apply a little heat with a hair dryer or heat gun to soften the adhesive. (Putting an iOpener on the bracket is not recommended, as this may bend the spring contacts along the top.)

El soporte se adhiere ligeramente en su lugar.

Suavemente levanta para despegar y remover el soporte, teniendo cuidado de no doblarlo.

Si es necesario, aplica un poco de calor con un pistola de calor para ablandar el adhesivo (No es recomendable colocar un iOpener en el soportes ya que podría doblar los contactos de muelle a lo largo de la parte superior)

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.