Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 3 tutoriels qui comprennent cette étape.

Anglais
Italien

Traduction de l’étape 2

Étape 2
The bracket is lightly adhered in place. Gently lift to unstick and remove the bracket, being careful not to bend it. If necessary, apply a little heat with a hair dryer or heat gun to soften the adhesive. (Putting an iOpener on the bracket is not recommended, as this may bend the spring contacts along the top.)
  • The bracket is lightly adhered in place.

  • Gently lift to unstick and remove the bracket, being careful not to bend it.

  • If necessary, apply a little heat with a hair dryer or heat gun to soften the adhesive. (Putting an iOpener on the bracket is not recommended, as this may bend the spring contacts along the top.)

La staffa aderisce leggermente alla parte sottostante.

Solleva delicatamente la staffa per staccarla e rimuoverla, stando attento a non piegarla.

Se necessario, applica un po' di calore con un asciugacapelli o una pistola termica per ammorbidire l'adesivo. (È sconsigliato disporre un iOpener sulla staffa, perché questo potrebbe piegare i contatti a molla disposti sulla parte superiore).

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.