Aller au contenu principal

Info : Vous modifiez un tutoriel pré-requis. Toutes les modifications apportées affecteront les tutoriels qui comprennent cette étape.

Anglais
Chinois

Traduction de l’étape 2

Étape 2
The bracket is lightly adhered in place. Gently lift to unstick and remove the bracket, being careful not to bend it. If necessary, apply a little heat with a hair dryer or heat gun to soften the adhesive. (Putting an iOpener on the bracket is not recommended, as this may bend the spring contacts along the top.)
  • The bracket is lightly adhered in place.

  • Gently lift to unstick and remove the bracket, being careful not to bend it.

  • If necessary, apply a little heat with a hair dryer or heat gun to soften the adhesive. (Putting an iOpener on the bracket is not recommended, as this may bend the spring contacts along the top.)

支架轻轻粘在适当位置。

轻轻抬起以取下并取下每个支架,小心不要弯曲它。

如有必要,用吹风机或热风枪稍微加热以软化粘合剂。 (建议不要在支架上放置iOpener,因为这可能会使弹簧触点沿顶部弯曲。)

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.