Aller au contenu principal
Anglais
Français

Traduction de l’étape 1

Étape 1
Take a PH0 Phillps head screw bit to take the screw out. Take a pry tool and disconnect the ribbon cabe from the logic board Then use a plastic pry tool and take out the front facing camera out of its housing.
  • Take a PH0 Phillps head screw bit to take the screw out.

  • Take a pry tool and disconnect the ribbon cabe from the logic board

  • Then use a plastic pry tool and take out the front facing camera out of its housing.

  • The front facing camera is clued on so use some force to pry it off.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.