Réparez vos affaires

Droit à la réparation

Pièces & Outils

Retourner au tutoriel
Anglais
Français
Étape précédente Étape suivante

Traduction de l’étape 7

Étape 7
Use the flat end of a spudger to push the edge of the tape down into the crevice between the battery and the speaker. This creates a tape "wall" which will help prevent any liquid adhesive from pooling behind it. Slide the spudger across the entire length of the crevice, pushing tape down to create a boundary.

  • Use the flat end of a spudger to push the edge of the tape down into the crevice between the battery and the speaker.

  • This creates a tape "wall" which will help prevent any liquid adhesive from pooling behind it.

  • Slide the spudger across the entire length of the crevice, pushing tape down to create a boundary.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.