Aller au contenu principal
Anglais
Français

Traduction de l’étape 26

Étape 26
The end of the mid-battery circuit board closer to the Smart Connector is held down with adhesive. Slide an opening pick underneath the mid-battery circuit board, near the Smart Connector. Carefully slice underneath the board around the post to release the board from the rear case.
  • The end of the mid-battery circuit board closer to the Smart Connector is held down with adhesive.

  • Slide an opening pick underneath the mid-battery circuit board, near the Smart Connector.

  • Carefully slice underneath the board around the post to release the board from the rear case.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.