Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Français
Anglais

Mac Pro 2009-2012 Case Replacement

Informations sur le tutoriel

= Terminé = Incomplet

      Décrivez la pièce ou le composant spécifique de ce device sur lequel vous êtes en train de travailler. Par ex : batterie

      Créer un titre.

      Ce bref résumé n'apparaîtra que dans les résultats de recherche.

      Communiquez des informations de base avant que le lecteur ne se plonge dans le tutoriel.

      Étapes du tutoriel

      Étape 1 — Open the Case

      To open the Mac Pro, you'll have to lift the clip on the back of the case

      Étape 2 — Remove the side panel

      Lift the flap to put it in the unlocked position, the panel should separate from the box without forcing.

      Étape 3 — Remove the hard drives

      Then to remove the hard drives, pull them towards you with a bit of force.

      Étape 4 — Remove the DVD drives

      Pull the DVD drives towards you, just like the hard drives.

      Étape 5 — Remove the CPU board

      Press both latches to unlock the bracket and then pull it towards you.

      Étape 6 — Disconnect the GPU

      Remove the 6 or 8 pin connector from your graphics card.

      Étape 7 — Disconnect the GPU power supply ( Optional )

      On the power supply there is a button, press it to move the power supply to the left (see picture)

      Étape 8 — Disconnect GPU support ( optional)

      Disconnect the PCI-e cables from the motherboard

      Étape 9 — Take out the PCI-e fan

      With a screwdriver unscrew the two screws that hold the fan bracket to the board

      Étape 10 — Disconnect the SATA Cables

      Behind the fan bracket there are 2 SATA cables, a 4 pin mini power supply and a 4 pin fan

      Étape 11 — Unscrew CPU support

      With a H2.5 screwdriver, unscrew the screws on the bottom of the bracket (photo 2)

      Étape 12 — Remove the CPU Fan

      Remove the clip at the top of the fan

      Étape 13 — Remove the CPU Fan

      Similar to the top remove the clip at the bottom and pull out the fan.

      Étape 14 — Disconnect Fan and Speakers

      Disconnect the 2 x 4pin fan cables and the 1 x 2 pin speaker cable

      Étape 15 — Remove the CPU Support

      Pull the CPU support towards you

      Étape 16 — Remove the expansion card connector

      Remove the ribbon that connects the motherboard to the expansion card (USB, Jack, Power Off etc.)

      Étape 17 — Remove the expansion card

      Unscrew the 6 screws that hold the card in place.

      Étape 18 — Remove the cover

      unscrew the two screws and remove the cover

      Étape 19 — Unplug the power supply

      Push on both knobs to remove the power connector

      Étape 20 — Separate the power supply

      Unscrew the 4 screws that hold in the power supply

      Étape 21 — Remove the power supply

      Pull the power supply towards you.

      Étape 22 — Detach the bluetooth antenna

      Unclip the bluetooth antenna

      Étape 23 — Remove the mother board

      Unscrew the 10 screws holding in the motherboard

      Étape 24 — Change the case

      Follow the steps in reverse to resemble.

      Vos contributions sont faites dans le cadre de la licence open source Creative Commons.