Aller au contenu principal

MacBook Pro 15" Touch Bar Late 2016 バッテリーの接続方法

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 8 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 1

Étape 1
MacBook Pro 15" Touch Bar Late 2016 Battery Disconnection: étape 0, image 1 de 2 MacBook Pro 15" Touch Bar Late 2016 Battery Disconnection: étape 0, image 2 de 2
  • Peel up and remove the large rectangular battery board cover, on the edge of the logic board nearest the battery.

  • If the cover doesn't peel up easily, apply mild heat with an iOpener, hair dryer, or heat gun to soften the adhesive underneath, and try again.

  • If the cover doesn't seat securely during reassembly, try rotating it 180 degrees. It must be oriented correctly in order for the adhesive pads underneath to contact the board screws.

バッテリー付近のロジックボードの端にある、大きな長方形のバッテリー用ボードカバーを剥がして、取り出します。

カバーが容易に剥がれない場合は、iOpenerやヘアドライヤーもしくはヒートガンを使って接着剤を温めて、この下に留められた接着剤を柔らかくして、再試行してください。

再組み立ての際に、カバーがしっかりと装着しなければ、180度回転させて再施行してください。下の接着パッドがボードのネジに接触するには、正しい方向に装着しなければなりません。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.