Aller au contenu principal

MacBook Pro 15" Touch Bar Late 2016 トラックパッドアセンブリの修理

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 5 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 6

Étape 6
MacBook Pro 15" Touch Bar Late 2016 Trackpad Assembly Replacement: étape 0, image 1 de 3 MacBook Pro 15" Touch Bar Late 2016 Trackpad Assembly Replacement: étape 0, image 2 de 3 MacBook Pro 15" Touch Bar Late 2016 Trackpad Assembly Replacement: étape 0, image 3 de 3
  • Swing the display open slightly, but keep the MacBook upside-down. The trackpad assembly should separate and lay flat on the display.

  • Gently feed the trackpad's ribbon cable through its slot in the chassis.

  • Carefully note the correct slot for the trackpad cable during reassembly—it goes through the narrow slot alongside the battery, not the bigger slot near the MacBook Pro's front edge.

ディスプレイをわずかに開きますが、MacBookを裏返したままにします。トラックパッドアセンブリは離して、ディスプレイ上で水平に載せます。

トラックパッドのリボンケーブルを筐体のスロットに慎重に通します。

再組み立て中、トラックパッドケーブルを取り付ける正しいスロットであるかどうか確認してください。MacBookProの前端近くにある大きめのスロットではなく、バッテリーに沿ってある狭いスロットにケーブルを通します。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.