Aller au contenu principal
Anglais
Français

Traduction de l’étape 7

Étape 7
1- Grab a Spudger/ Pry Tool or Two. 2- Gently Remove All Antennas from the Wireless Card. Attention! Make sure to pull the connectors straight up and off. Pulling them off at an angle can damage the connectors.
Remove Antennas from Palm Rest
  • 1- Grab a Spudger/ Pry Tool or Two.

  • 2- Gently Remove All Antennas from the Wireless Card.

  • Attention! Make sure to pull the connectors straight up and off. Pulling them off at an angle can damage the connectors.

  • Tip! Use 2 Spudgers or 1 Spudger and a finger nail to grab two sides. Then pull gently wiggle up and off.

  • 3- Gently remove the antenna cables from their groves.

  • Tip! Start at the hinge side to make getting the cables attached to the cpu fan undone easier with the extra slack.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.