Aller au contenu principal

2016年带 Touch Bar 的 MacBook Pro 主板组件更换

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 2 tutoriels qui comprennent cette étape.

Anglais
Chinois

Traduction de l’étape 24

Étape 24
MacBook Pro 15" Touch Bar Late 2016 Logic Board Assembly Replacement: étape 0, image 1 de 3 MacBook Pro 15" Touch Bar Late 2016 Logic Board Assembly Replacement: étape 0, image 2 de 3 MacBook Pro 15" Touch Bar Late 2016 Logic Board Assembly Replacement: étape 0, image 3 de 3
  • Disconnect all three antenna cables by prying each one straight up from its socket.

  • Slide your tweezers or the flat end of your spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it.

  • To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place.

从插座中垂直向上撬开所有三根天线电缆。

将镊子或撬棒的扁平端滑到每根电缆下方,直到它靠近插座,然后轻轻扭动或撬起以断开连接。

要重新连接每根电缆,请将接口直接对准其插槽,然后向下按,使其卡入到位。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.