Aller au contenu principal
Anglais
Français

Traduction de l’étape 7

Étape 7
In order to remove the I/O Board you are going to go to the back of the unit and remove the six (labeled in red) Screws. I found it interesting that there are so many screws on this part of the assembly. My guess is that Sony thinks that this is where A) the cables get connected and you want a secure connection and/or B)Being that other devices are to be hooked intt this device if anything where to be dropped off a Tv of Entertainment unit this part of the device would stand a better chance of not getting damaged.  I have seen that before, Twisted RCA connectors that don't work anymore.
  • In order to remove the I/O Board you are going to go to the back of the unit and remove the six (labeled in red) Screws.

  • I found it interesting that there are so many screws on this part of the assembly. My guess is that Sony thinks that this is where A) the cables get connected and you want a secure connection and/or B)Being that other devices are to be hooked intt this device if anything where to be dropped off a Tv of Entertainment unit this part of the device would stand a better chance of not getting damaged. I have seen that before, Twisted RCA connectors that don't work anymore.

  • Now remove the Input/Output Board being careful with the connectors and the switch on the lower right

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.