Aller au contenu principal

Fix Your Stuff

Right to Repair

Parts & Tools

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Anglais
Italien

Traduction de l’étape 16

Étape 16
Use a T8 Torx driver to remove the two remaining 4.9 mm hinge screws (one from each hinge). Remove the topmost screw last, using one hand to steady both halves of the MacBook Pro to make sure they don't separate and fall over unexpectedly. Remove the topmost screw last, using one hand to steady both halves of the MacBook Pro to make sure they don't separate and fall over unexpectedly.
  • Use a T8 Torx driver to remove the two remaining 4.9 mm hinge screws (one from each hinge).

  • Remove the topmost screw last, using one hand to steady both halves of the MacBook Pro to make sure they don't separate and fall over unexpectedly.

Usa un cacciavite Torx T8 per rimuovere le due viti da 4,9 mm rimaste nella cerniere (una per ciascuna cerniera).

Rimuovi per ultima la vite che resta in alto, usando una mano per stabilizzare le due metà del MacBook Pro e fare in modo che non possano separarsi e cadere accidentalmente.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.