Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Anglais
Japonais

Traduction de l’étape 16

Étape 16
Use a T8 Torx driver to remove the two remaining 4.9 mm hinge screws (one from each hinge). Remove the topmost screw last, using one hand to steady both halves of the MacBook Pro to make sure they don't separate and fall over unexpectedly. Remove the topmost screw last, using one hand to steady both halves of the MacBook Pro to make sure they don't separate and fall over unexpectedly.
  • Use a T8 Torx driver to remove the two remaining 4.9 mm hinge screws (one from each hinge).

  • Remove the topmost screw last, using one hand to steady both halves of the MacBook Pro to make sure they don't separate and fall over unexpectedly.

T8トルクスドライバーを使って、4.9 mmヒンジ用ネジ(各ヒンジから1本ずつ)を計2本外します。

最上位のネジを最後に外してください。片手でMacBook Proをしっかりと固定します。2つのパーツが離れないように、予期せず倒れないようにご注意ください。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.