Aller au contenu principal
Anglais
Français

Traduction de l’étape 2

Étape 2
Carefully line up an edge of the adhesive with the corresponding edge of the phone frame. Make sure the adhesive is properly oriented. Set the adhesive down lightly on the frame. Make sure that the adhesive cutouts match the phone, and that the camera and sensors are not covered by adhesive.
  • Carefully line up an edge of the adhesive with the corresponding edge of the phone frame. Make sure the adhesive is properly oriented.

  • Set the adhesive down lightly on the frame.

  • Make sure that the adhesive cutouts match the phone, and that the camera and sensors are not covered by adhesive.

  • If it is not properly aligned, carefully peel the adhesive back up.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.