Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 2 tutoriels qui comprennent cette étape.
Traduction de l’étape 7
Étape 7
-
Remove two cables connected to the motherboard.
-
Use thin tweezers to push down on the clear piece and slide it out. At this point half of the clear piece should be free.
-
Remove one screw that is holding down the middle of the clear piece to the body of the camera. The whole structure with wires will swing out.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.