Aller au contenu principal

Autosampler Configuration (For Old & New Versions)

Anglais
Français

Traduction de l’étape 10

Étape 10
Autosampler Configuration  (For Old & New Versions), Configuring "event mark".: étape 0, image 1 de 1
Configuring "event mark".
  • 11. Press "ENTER/PROGRAM" to configure "EVENT MARK". Press "ENTER/PROGRAM" button.

  • Use arrow to select "CONTINUOUS SIGNAL". Press "ENTER/PROGRAM" button.

  • Use arrow to select "PUMP CYCLE". Press "ENTER/PROGRAM" button.

  • It is critical this setting is configured in order for the sensor node to operate the autosampler!

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.