Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Anglais
Chinois

Traduction de l’étape 9

Étape 9
The following four steps show how to install the back cover support adhesive(s). If you are replacing the fingerprint sensor or the rear bezel, be sure to complete those tasks first. Figure out how the support strip aligns with the surfaces by matching the adhesive strip's contours with the adhesive residue and the phone frame.
Back cover support adhesive
  • The following four steps show how to install the back cover support adhesive(s).

  • If you are replacing the fingerprint sensor or the rear bezel, be sure to complete those tasks first.

  • Figure out how the support strip aligns with the surfaces by matching the adhesive strip's contours with the adhesive residue and the phone frame.

  • Generally speaking, the adhesive side that's covered by a clear plastic liner should affix to the back cover, while the side that's covered by a colored liner should affix to the phone frame.

  • Use an opening tool and high concentration isopropyl alcohol to remove all adhesive residue from the phone frame.

  • If you are re-using the back cover, remove all adhesive residue from the back cover.

  • Do not use metal tools as they will scratch the back cover's coating.

以下四个步骤显示了如何安装后盖支撑胶。

如果要更换指纹传感器或后挡板,请确保先完成这些任务。

通过使胶粘带的轮廓与胶粘剂残留物和电话框架相匹配,找出支撑带如何与表面对齐。

一般来说,被透明塑料衬里覆盖的粘合面应粘贴到后盖上,而被彩色衬里覆盖的面应粘贴到电话框上。

使用打开工具和高浓度异丙醇清除手机框架上的所有残留胶。

如果要重新使用后盖,请清除后盖上的所有残留粘合剂。

请勿使用金属工具,因为它们会划伤后盖的涂层。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.