Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Anglais
Chinois

Traduction de l’étape 5

Étape 5
The following four steps show how to remove and transfer the rear bezel. The bezel supports the rear cameras, flash, and the fingerprint sensor (on some models). Heat an iOpener and apply it to the rear bezel for a minute. Starting from the outward-facing side of the back cover, push the bezel inwards with a finger to loosen the bezel from its cutout.
Rear bezel
  • The following four steps show how to remove and transfer the rear bezel. The bezel supports the rear cameras, flash, and the fingerprint sensor (on some models).

  • Heat an iOpener and apply it to the rear bezel for a minute.

  • Starting from the outward-facing side of the back cover, push the bezel inwards with a finger to loosen the bezel from its cutout.

  • Do not push too hard, or you may bend the bezel.

  • Alternatively, you can pry around the bezel with an opening tool to loosen it from the back cover.

以下四个步骤显示了如何卸下和转移后挡板。挡板支持后置摄像头,闪光灯和指纹传感器(某些型号)。

加热iOpener并将其应用到后挡板一分钟。

从后盖的朝外的一面开始,用手指向内推动挡板,以从挡板的开口处松开挡板。

不要用力推,否则可能会弯曲挡板。

或者,你可以使用打开工具撬动挡板,以将其从后盖松开。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.