Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Anglais
Chinois

Traduction de l’étape 3

Étape 3
If you are only replacing the fingerprint sensor and not the fingerprint sensor gasket, skip this step. Use an opening tool to pry the fingerprint sensor off of the gasket.
  • If you are only replacing the fingerprint sensor and not the fingerprint sensor gasket, skip this step.

  • Use an opening tool to pry the fingerprint sensor off of the gasket.

  • Remove the colored plastic liner on the replacement gasket to expose the adhesive.

  • Carefully align and lay the fingerprint sensor onto the sticky side of the gasket.

  • Once aligned, press down firmly with your finger to bond the adhesive.

如果仅更换指纹传感器而不是指纹传感器垫片,请跳过此步骤。

使用打开工具将指纹传感器撬出垫圈。

取下更换垫片上的彩色塑料衬套,以露出粘合剂。

小心地将指纹传感器对准并放在垫圈的粘性面上。

对齐后,用手指用力向下按以粘合粘合剂。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.