Autosampler Battery Enclosure Assembly (For Old & New Versions)

Anglais

Français

Traduction de l’étape 10

Étape 10

Creating a 2-pin amphenol connector.

24. Disconnect the 2-pin amphenol connector into its individual parts.
25. Loosen the screws on the amphenol connector. Thread the stripped wire through the end of the amphenol connector and through the middle piece of the amphenol connector.
The black GND wire should be in the “A” port and the red PWR wire should be in the “B” port.
26. Solder the wires to the other end of the amphenol connector.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.