Traduction de l’étape 12
Étape 12
Creating a 2-pin amphenol connector.
-
30. Screw the amphenol pieces back together. Then tighten the external screws.
-
31. This is what a final 2-pin amphenol connector looks like.
-
32. Thread the 2-pin amphenol autosampler wire through the top hole and the battery connector wire through the bottom hole of the enclosure box. Leave about a foot of each on the outside of the box. Tighten the glands.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.