Aller au contenu principal

Reemplazo de la placa de escudo de LCD de iPad Mini 3 Wi-Fi LCD

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 16 tutoriels qui comprennent cette étape.

Anglais
Espagnol

Traduction de l’étape 4

Étape 4
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 1 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 2 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 3 de 3
  • While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad.

  • Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD.

  • Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly.

Mientras sujetas el cristal con la ventosa, desliza la punta de una púa de apertura en el hueco entre el cristal y el cuerpo del iPad.

No introduzcas la púa de apertura más allá del bisel negro del lateral de la pantalla. Introducir la púa demasiado lejos puede dañar la pantalla LCD.

Tira de la punta de plástico de la ventosa para liberar el sellador de vacío y retira la ventosa del ensamblaje de pantalla.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.