Aller au contenu principal

Reemplazo de la placa de escudo de LCD de iPad Mini 3 Wi-Fi LCD

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 16 tutoriels qui comprennent cette étape.

Anglais
Espagnol

Traduction de l’étape 14

Étape 14
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 1 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 2 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 3 de 3
  • Insert the previous pick deeper into the iPad and slide it away from the camera toward the corner.

  • Be very careful of the small antenna cable near the upper-right corner. Only slide the pick away from the camera—while sliding it in the opposite direction you may accidentally tear the antenna cable.

Inserta la púa anterior más profundamente en el iPad y deslízala alejándola de la cámara hacia la esquina.

Ten mucho cuidado con el pequeño cable de antena situado cerca de la esquina superior derecha. Desliza la púa sólo en dirección opuesta a la cámara; si lo haces en sentido contrario, puedes romper accidentalmente el cable de la antena.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.