Aller au contenu principal

iPad Mini 3 Wi-Fi LCD-Abschirmung tauschen

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 16 tutoriels qui comprennent cette étape.

Anglais
Allemand

Traduction de l’étape 29

Étape 29
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 1 de 2 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 2 de 2
  • Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.

  • Insert the flat end of a spudger under the LCD between it and the LCD shield plate and lift gently.

  • Be very careful not to get the spudger under the shield plate. It must be between the LCD and the shield.

  • Even bending the LCD slightly can permanently damage it, so be extremely careful as you lift.

Versuche nicht das LCD ganz zu entfernen. Es ist weiterhin durch verschiedene Kabel am Ende mit dem Home Button mit dem iPad verbunden. Hebe es nur am Ende mit der Frontkamera an.

Schiebe das flache Ende des Spudgers unter das LCD zwischen LCD und Abschirmblech, und hebe es vorsichtig an.

Achte beim Einsetzen des Spudgers darauf, dass du nicht unter das Abschirmblech gerätst. Der Spudger muss zwischen LCD und Abschirmblech hineingehen.

Das LCD kann schon durch leichtes Verbiegen beschädigt werden, sei also beim Hochheben besonders vorsichtig.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.