Aller au contenu principal

iPad Mini 3 Wi-Fi LCDシールドプレートの交換

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 16 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 29

Étape 29
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 1 de 2 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 2 de 2
  • Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.

  • Insert the flat end of a spudger under the LCD between it and the LCD shield plate and lift gently.

  • Be very careful not to get the spudger under the shield plate. It must be between the LCD and the shield.

  • Even bending the LCD slightly can permanently damage it, so be extremely careful as you lift.

液晶ディスプレイを完全に取り外さないでください。液晶ディスプレイは、ホームボタン側から数本のケーブルでiPadに接続されています。前面カメラ側の端からのみ持ち上げる。

LCDとLCDシールドプレートの間のLCDの下にスパッジャーの平面側を差し込み、ゆっくりと持ち上げます。

シールド板の下にスパッジャーを入れないよう十分注意してください。LCDとシールドの間に挟んでください。

少し曲げるだけでもLCDに永久的なダメージを与えてしまうので、細心の注意を払って持ち上げてください。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.