Réparez vos affaires Communauté Boutique

Rimozione vetro posteriore Huawei Honor 9

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 7 tutoriels qui comprennent cette étape.

Retourner au tutoriel
Anglais
Italien
Étape précédente Étape suivante

Traduction de l’étape 2

Étape 2
Huawei Honor 9 Rear Glass Removal: étape 0, image 1 de 2 Huawei Honor 9 Rear Glass Removal: étape 0, image 2 de 2

  • Secure a suction handle to the lower edge of the rear glass, as close to the edge as possible.

  • If the phone's rear glass is cracked, the suction cup may not stick. Try lifting it with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed.

  • Lift the rear glass with the suction cup to create a gap between the glass and the frame.

  • Insert an opening pick into the gap.

  • Don't attempt to insert a pick between the back glass and the frame before creating a gap. The glass is covered with foil from the inside, and by not creating a gap, you risk inserting the pick between the glass and the foil instead, which would permanently damage the foil and ruin the solid color of the back panel.

  • If you have trouble, apply more heat to further soften the adhesive. Follow the iOpener instructions to avoid overheating.

Disponi una ventosa il più vicino possibile al bordo inferiore del vetro posteriore.

Se il vetro posteriore del telefono è crepato, la ventosa potrebbe non aderire bene. Cerca di sollevarla con del nastro adesivo tenace oppure applica della supercolla (cianoacrilica) per incollare la ventosa e lasciala asciugare prima di procedere.

Solleva il pannello di vetro con la ventosa per creare una fessura tra il vetro e la scocca.

Inserisci un plettro di apertura nella fessura.

Se incontri delle difficoltà, applica dell'altro calore per ammorbidire ancora l'adesivo. Segui le istruzioni dell'iOpener per evitare il surriscaldamento.

[* black] Secure a suction handle to the lower edge of the rear glass, as close to the edge as possible.
[* icon_note] If the phone's rear glass is cracked, the suction cup may not stick. Try [https://d3nevzfk7ii3be.cloudfront.net/igi/4MmKE22Cy2MavVZU|lifting it with strong tape|new_window=true], or superglue the suction cup in place and allow it to cure so you can proceed.
[* black] Lift the rear glass with the suction cup to create a gap between the glass and the frame.
[* black] Insert an opening pick into the gap.
+ [* icon_caution] Don't attempt to insert a pick between the back glass and the frame before creating a gap. The glass is covered with foil from the inside, and by not creating a gap, you risk inserting the pick between the glass and the foil instead, which would permanently damage the foil and ruin the solid color of the back panel.
[* icon_note] If you have trouble, apply more heat to further soften the adhesive. Follow the iOpener instructions to avoid overheating.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.